Suzuki Grand Vitara 1998, Service Manual

Page: 647 / 801

YH4
GRAND
VITARA
“a – b’” : 448 mm (17.64 in.)
“a – f’” : 1054 mm (41.50 in.)
“a – h” :
926 mm (36.43 in.)
“a – g” : 1050 mm (41.34 in.)
“b – b’” :
888 mm (34.96 in.)
“b – d” : 400 mm (15.75 in.)
“b’ – f” : 1314 mm (51.73 in.)
“b – e” :
837 mm (32.95 in.)
“b – f” : 892 mm (35.12 in.)
“b’ – c” : 650 mm (25.59 in.)
“b’ – g” : 996 mm (39.21 in.)
“b’ – f” : 1314 mm (51.73 in.)
“c – d” : 1245 mm (49.02 in.)
“c – e” : 1293 mm (50.90 in.)
“f – f’” : 1030 mm (40.55 in.)
“f’ – g” :
512 mm (20.16 in.)
“g – h” : 808 mm (31.79 in.)
“g – g’” : 1544 mm (60.79 in.)
a. Clip hole in the center of head lining rear installation section
b (b’). Innermost end of roof panel installation section
c.
Installation hole in upper part of back door striker
d. Installation hole in uppermost part of upper hinge
e. Installation hole in uppermost part of lower hinge
f (f’). Innermost end of rear floor tail member installation section
g (g’). Installation hole in outer upper section of R-COMB R lamp
h.
Nut hole
BODY SERVICE 9-29
4 door model