YH4
GRAND
VITARA
7B1-70
AUTOMATIC TRANSMISSION (4 A / T)
1. Cover
2. Screw
3. Shift lock solenoid rod
(or manual release plate)
4. Select lever
5. Button
Not turn between “ACC”
and “LOCK” positions.
Type-1
Type-2
With shift lock solenoid rod (or manual release plate) moved
in arrow direction and ignition key turned to “ACC” position, se-
lect lever can be shifted from “P” range position to any other
range.
With shift lock solenoid rod (or manual release plate) moved
in arrow direction and ignition key turned to “LOCK” position,
select lever can not be shifted from “P” range position to any
other range.
When ignition switch is turned “ON” and brake pedal is de-
pressed, select lever can be shifted from “P” range position to
any other range.
3) With select lever shifted to any position other than “P” range,
check that ignition key cannot be turned “LOCK” position and it
cannot be removed from ignition switch unless it is at “LOCK”
position.
Summary of Contents for Grand Vitara 1998
Page 225: ...YH4 GRAND VITARA FRONT SUSPENSION 3D 23 TIGHTENING TORQUE SPECIFICATIONS ...
Page 531: ...YH4 GRAND VITARA 8 6 BODY ELECTRICAL SYSTEM POWER SUPPLY DIAGRAM Refer to Section 8A ...
Page 659: ...YH4 GRAND VITARA BODY SERVICE 9 41 1 Side body outer panel A Apply sealant B Brush treatment ...
Page 673: ...YH4 GRAND VITARA BODY SERVICE 9 55 B B C C 2 DOOR MODEL ...
