YH4
GRAND
VITARA
For CAMI production vehicle
For IWATA production vehicle
1B-28
AIR CONDITIONING (OPTIONAL)
8) After the system has been charged with specified amount of re-
frigerant or when low pressure gauge (1) and high pressure
gauge (2) have indicated about 2 and 15 kg / cm
2
respectively,
close low pressure side vale (3) of manifold gauge set (4). If
equipped with sight glass in this time, look into the sight glass (6)
of condenser outlet pipe (5) and check that there are no bubbles
(7) in it, which means that the system is fully charged.
Low pressure gauge when charged with specified amount:
About 200 – 300 kPa (2 – 3 kg / cm
2
, 29 – 43 psi)
(At A / C inlet temperature 30 – 35
_
C, 86 – 95
_
F)
High pressure gauge when charged with specified amount:
About 1370 – 1670 kPa (14 – 17 kg / cm
2
, 200 – 244 psi)
(At A / C inlet temperature 30 – 35
_
C, 86 – 95
_
F)
Summary of Contents for Grand Vitara 1998
Page 225: ...YH4 GRAND VITARA FRONT SUSPENSION 3D 23 TIGHTENING TORQUE SPECIFICATIONS ...
Page 531: ...YH4 GRAND VITARA 8 6 BODY ELECTRICAL SYSTEM POWER SUPPLY DIAGRAM Refer to Section 8A ...
Page 659: ...YH4 GRAND VITARA BODY SERVICE 9 41 1 Side body outer panel A Apply sealant B Brush treatment ...
Page 673: ...YH4 GRAND VITARA BODY SERVICE 9 55 B B C C 2 DOOR MODEL ...