1D-14 Engine Mechanical:
2) Remove the cylinder head bolt (2).
3) The cylinder head can be removed after its twelve
nuts (M10) are removed.
NOTE
When loosening the cylinder head nuts,
loosen each nut little by little, in descending
order, according to the numbers cast on the
cylinder head.
4) Remove the cylinder head plate “A”.
5) Firmly grip the cylinder head at both ends and lift it
straight up. If the cylinder head does not come off,
lightly tap on the finless portions of it using a plastic
mallet.
CAUTION
!
Be careful not to damage the fins when
removing or handling the cylinder head.
Cylinder
1) Remove the cylinder head gasket (1), O-rings (2)
and dowel pins (3).
2) Remove the left and right oil return pipes (4).
3) Remove the cylinder base nut (5).
4) Firmly grip the cylinder at both ends and lift it straight
up. If the cylinder does not come off, lightly tap on
the finless portions of it using a plastic mallet.
CAUTION
!
Be careful not to damage the fins when
removing or handling the cylinder.
2
I649G1140042-02
“6”
“2” “4”
“8”
“9”
“5”
“1”
“3”
“7”
“12”
“11”
“10”
“A”
I649G1140354-01
I649G1140044-01
1
2
2
2
3
3
I649G1140355-02
4
I649G1140046-02
5
I649G1140047-02
I649G1140048-01
Summary of Contents for 1200 bandit
