Suzuki 1200 bandit, Service Manual

Page: 379 / 447

Clutch: 5C-17
7) Insert the clutch drive plates and driven plates one by one into the clutch sleeve hub in the prescribed order, No.3
drive plate (6) first.
NOTE
For drive plate
Three kinds of the drive plate (No. 1, No. 2 and No. 3) are equipped in the clutch system, they can be
distinguished by the inside diameter and clutch facing “C”.
NOTE
For driven plate
Two kinds of the driven plate (No. 1 and No. 2) are equipped in the clutch system, they can be
distinguished by the thickness. The No. 1 and No. 2 driven plates are 9 in total. The driven plate No. 2
should be used within 4 pcs. The driven plate No. 2 should be installed between third to seventh
position from the pressure plate.
“A” “B”
7 6 8
10
9
I649G1530044-02
6. No.3 drive plate 10. No.2 driven plate (1 – 4 pcs)
: The No.1 and No.2 driven plats are 9 in total.
7. No.1 drive plate “A”: Direction of inside
8. No.2 drive plate “B”: Pressure plate side
9. No.1 driven plate (5 – 8 pcs)
: The No.1 and No.2 driven plats are 9 in total.
“C”: Clutch facing
: No.1 and No.2 drive plates resemble each other very closely in external appearance.
Make sure to check the numbers of clutch facing, before installing them.
“C”
I649G1530045-01
Drive plate I.D. Clutch facing “C”
No.1 101 mm (4.0 in) 40 pcs
No.2 101 mm (4.0 in) 48 pcs
No.3 108 mm (4.3 in) 48 pcs