Suzuki 1200 bandit, Service Manual

Page: 86 / 447

1D-18 Engine Mechanical:
• Tighten the twelve nuts (M10) in ascending order and
to the specified torque.
Tightening torque
Cylinder head nut: 38 N·m (3.8 kgf-m, 27.5 lb-ft)
• After firmly tightening the twelve nuts, install the
cylinder head bolt (M6) (1) and tighten it to the
specified torque.
Tightening torque
Cylinder head bolt (a): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Install the cam chain guide (2) as shown.
• While holding down the cam chain, rotate the
crankshaft clockwise and align the “T” mark on the
CKP sensor rotor with the center of the CKP sensor.
CAUTION
!
Turn the crankshaft using a 19 mm wrench.
Never rotate the crankshaft using a 6 mm T-
type wrench.
“6”
“2” “4”
“8”
“9”
“5” “1” “3”
“7”
“12”
“11”
“10”
I649G1140065-02
(a)
1,
I649G1140066-02
2
I649G1140067-01
I649G1140068-02