Suzuki 1200 bandit, Service Manual

Page: 66 / 447

1B-6 Emission Control Devices:
PAIR System Inspection
B649G11206004
PAIR Hose and Pipe
1) Remove the fuel tank. Refer to “Fuel Tank Removal
and Installation: in Section 1G”.
2) Inspect the hoses and pipes for wear or damage.
3) Inspect that the hoses and pipes are properly
connected. Refer to “PAIR System Hose Routing
Diagram: ”.
• PAIR hose No.1 (1)
• PAIR hose No.2 (2)
• PAIR hose No.3 (3)
• PAIR hose No.4 (4)
• Vacuum hose (5)
• Air cleaner hose (6)
4) Install the fuel tank. Refer to “Fuel Tank Removal
and Installation: in Section 1G”.
PAIR Reed Valve
1) Remove the PAIR valve. Refer to “PAIR System
Removal and Installation: ”.
2) Remove the PAIR valve covers (1).
3) Remove the reed valves.
4) Inspect the reed valves for the carbon deposit.
If the carbon deposit is found in the reed valve,
replace the PAIR valve with a new one.
5) Install the read valve and PAIR valve covers.
6) Install the PAIR valve. Refer to “PAIR System
Removal and Installation: ”.
PAIR Valve
1) Remove the PAIR valve. Refer to “PAIR System
Removal and Installation: ”.
2) Inspect the PAIR valve’s body for damage.
3) Inspect the operation of the PAIR valve as follows.
a) Blow into the air inlet port of the PAIR valve as
shown. If air does not flow out, replace the PAIR
valve assembly with a new one.
2
1
6
5
3
4
I649G1120014-03
1
1
I649G1120001-01
I649G1120002-01
I649G1120003-01
I649G1120004-01