Installation
SUSPA ELS3 HeavyDuty - Installation Instruction
Page 37
Check the mounting screws of the connection set HD to ensure that the tow fixing plates are fixed
tightly to one another. Take care not to over-tighten the mounting screws (recommended
tightening torque: max. 10 Nm).
Figure 19 Connection set of the HD 2-leg system: connected subframes
Optional: Mounting the extension set HD
The extension set HD enables connection of commercially available extension elements (e.g.
aluminum profiles, holding rails, trays, perforated tabletops) to the rear side on the frame of the
ELS3 HeavyDuty subframe.
Figure 20 Extension set of the HD 2-leg system
In the process, you have to consider that additional loads attached to the rear side does not cause
any risk of tipping over for the HeavyDuty subframe and the max. permissible load of every
individual HeavyDuty subframe is complied with.
