Service and Maintenance
SUSPA ELS3 HeavyDuty - Installation Instruction
Page 65
8.2
Instructions for Maintenance
8.2.1
Cleaning
WARNING
Danger of injury by disregarding the manufacturer’s instructions
The function of the components may be impaired as a result of ignoring the manufacturer’s
cleaning instructions.
Follow all applicable environmental regulations when cleaning.
Remove all cleaning aids after performing cleaning work.
Retract the Height Adjustment System before cleaning.
Remove the load from all lifting elements before maintenance works.
Unplug the motor control from the mains before cleaning.
Stabilize the work surface or the HeavyDuty subframe on which the Height Adjustment
System is secured before maintenance works.
Allow the components to cool off before cleaning.
Clean the system components with a mild detergent and a damp cloth.
Liquid entry of any kind must be strictly avoided.
Do not use any corrosive detergents or high pressure washing systems to clean the
components of the Height Adjustment System.
Before restarting operation make sure the system is clean and dry.
8.3
Maintenance
The Height Adjustment System and the HeavyDuty subframe should be checked regularly to
determine whether there are conditions that lead to excessive wear or damage to components.
Especially the following possible causes of system failure should be considered.
IMPORTANT
The maintenance instructions given in the following must be understood as
recommendations by the manufacturer. The operator of the Height Adjustment System and the
HeavyDuty subframe is obligated to document maintenance-related observations and to
supplement and add specifications to the maintenance list in these installation instructions on their
own. In addition, the maintenance instructions of the manufacturers of outsourced parts must be
observed and followed!
