Installation
SUSPA ELS3 HeavyDuty - Installation Instruction
Page 27
6.2
Operating Conditions
Physical operating conditions
Operating range:
Functional operation
▪
Min + 5 °C
▪
Max + 40 °C
Relative moisture:
▪
Max 80% at 32 °C, above that decreasing linearly to 50% at
40 °C
Contamination:
No heavy contamination due to dust, acids, corrosive gases
Table 16 Operating conditions
Do not operate the system outdoors. Do not expose the system to damp or wet conditions.
Avoid environments with chemical agents or corrosive environments.
Do not operate the system near flammable solvents, propellants and/or explosive substances
(e.g. gas, vapor, dust, etc.).
Do not expose the components of the Height Adjustment System including the HeavyDuty
subframe to any vibrations and/or shock loads.
Do not use the controller near the equipment that generates strong electromagnetic fields.
This may impair the function.
In order to prevent overheating in the controller, it should not be installed in constrained,
non-ventilated or thermally insulating locations. Adequate air circulation must be ensured.
IMPORTANT
Observe the country-specific regulations regarding setup and operation of word
surfaces with respect to lighting of the workstations.
For example: Lighting in accordance with ASR A3.4
The Technical Rules for Workstations (ASR) reflect the state of the art technology, occupational
medicine and occupational hygiene and other sound knowledge for the setup and operation of
workstations.
