Installation
SUSPA ELS3 HeavyDuty - Installation Instruction
Page 28
The values given in the table are the intensity of illumination on the reference area for visual tasks
that may be horizontal, vertical or inclined.
Lighting requirements (metal machining and processing, foundries and casting)
Working rooms, workplaces and jobs
Minimum value
of the
illumination
intensity
In lx
Minimum value
of the color
rendering
Index Ra
Metal machining and processing, foundries and casting
Assembly work:
- Rough
- Medium-fine
- Fine
- Very fine
200
300
500
750
80
80
80
80
Table 17 Lighting requirements
6.3
Install Components
Note the exact information of the installation dimensions provided in the schematic diagrams
of the Height Adjustment System including the HeavyDuty subframe.
6.3.1
Installation in General
CAUTION
Electrical components (lifting elements, electrical controllers, manual switches)
should be connected or disconnected only with the power plug pulled out!
Apply the load to the system in such a way that it is balanced (uniformly distributed) as much
as possible both on the HeavyDuty subframe as well as on the lifting elements.
Attach the lifting elements vertically and parallel to each other, so that they do not block each
other during lifting and lowering.
Satisfy yourself that the mounting screws supplied along with the subframe and the lifting
elements are fastened securely according to the specifications.
Keep electrical cord away from sharp edges and moving parts.
Avoid contact with moisture and heat.
Attach the electrical wires and power cords to the workstation or structure using cable ties or
clips.
