Transport
SUSPA ELS3 HeavyDuty - Installation Instruction
Page 23
5
Transport
5.1
Safety Instructions for Transport
WARNING
Danger of falling loads
There are risks caused by human misconduct and inadequately secured loads.
Allow only those individuals who have been specially trained to perform transportation work.
Secure the load against changing its position.
Pay attention to the position of the center of gravity of the component during transport.
Secure the component for transport by heavy goods vehicle on the loading surfaces with suitable
means.
WARNING
Danger of injury due to unsecured transport routes
There is the risk of stumbling or slipping while transporting the components.
Arrange for proper illumination of the routes, ramps and steps over which loads are moved.
Remove obstacles and stumbling points.
CAUTION
Damage caused by improper transport
Transport with extended lifting elements may result in risk of damage to property or personal
injury.
Retract the lifting element completely when transporting.
5.2
Transportation Procedure
The components have to be moved by suitable means. Use suitable cables, chains or straps for
loading and unloading according to the load / weight.
IMPORTANT
The shipment must be made by professional personnel of SUSPA GmbH. The
further transport must be made by professional personnel and private persons. The following
points must be observed for transporting / unloading of the components:
Note the center of gravity.
Avoid rubbing cables and lifting straps against sharp edges and corners.
Check the delivered components for completeness, damage or any other abnormalities.
Observe the applicable safety and accident prevention regulations during transport.
