Identification and Notes
SUSPA ELS3 HeavyDuty - Installation Instruction
Page 10
2.3
Intended Use
The SUSPA ELS3-500S-BTU-Q-HD system including the HeavyDuty subframe is used for height
adjustment of sitting and standing workbenches. The lifting elements and HeavyDuty subframes
are designed for compressive loads.
IMPORTANT
Please make sure that installation or start-up or the appropriate height
adjustment has been selected. Please note in this regard the technical data (see Sec. 4.1 Technical
Specifications), in particular the maximum load and adjustment range information.
Any other or otherwise expanded use of the Height Adjustment System including the HeavyDuty
subframes is considered to be usage not in the manner intended and thus improper. In this case,
the safety and protective functions of the Height Adjustment System may be impaired. SUSPA
GmbH assumes no liability for damage resulting from such improper use.
Intended use also includes:
▪
following all instructions in the installation instructions
▪
following all the safety instructions
▪
compliance with the maintenance intervals
This partly completed machinery is intended to be incorporated into other machinery, other partly
completed machinery/equipment or to be joined with another framework so as to form a complete
machine as specified under the Machinery Directive. The machine should be put into operation
only after a conformity evaluation procedure in accordance with the Machinery Directive has been
carried out for the complete machine
