Installation
SUSPA ELS3 HeavyDuty - Installation Instruction
Page 47
Figure 34 Controller in the cable tray hooked in the 2-leg table system
Figure 35 Controller in the cable tray hooked in the 4-leg table system
Do not mount / operate the controller:
▪
above or in front of heat sources (e.g. radiators),
▪
at locations exposed to direct incidence of sunlight,
▪
at or near easily inflammable materials or
▪
near high-frequency equipment (e.g. transmitters, radiation equipment or similar devices).
Make sure that connecting cables do not have kinks or are not exposed to mechanical stress.
IMPORTANT
For protection against over-voltage that may occur during thunderstorms, it is
recommended that you install over-voltage protection. Get advice from an electrical installation
engineer.
Controller
Cable tray
Controller
Cable tray
