26
Figure 3-2 Installing the Server into a Rack
3.1.5.
Installing the Server into a Telco Rack
To install the chassis into a Telco type rack, use two L-shaped brackets on
either side of the chassis (four in total). First, determine how far the server will
extend out the front of the rack. Larger chassis should be positioned to balance
the weight between front and back. If a bezel is included on your server,
remove it. Then attach the two front brackets to each side of the chassis, then
the two rear brackets positioned with just enough space to accommodate the
width of the rack.
Finish by sliding the chassis into the rack and tightening the brackets to the rack.
