284
3.
If you login using the default password, root, a warning message will
appear, asking you to change the password.
Click
Yes
to change the password or No to move ahead.
4.
SANWatch Commander will appear.
5.
For the first time login, you will be required to assign a range of IP
address for your RAID subsystem(s). The
Auto Discovery
function will
scan for every connected RAID arrays.
Specify the “
from
” and “
to
” addresses in the IP range fields.
Click
Start
to scan the network. Searching for the subsystems might take a
few minutes or more.
Once the scan is finished, a message will prompt. Click
OK
to proceed.
Note:
You can also get the IP address for every RAID subsystem connected by l
ong pressing the ENT key on its LCD panel. Please refer to the software
manual that came with your RAID subsystem(s) for more details.
