Surveon NVR2100 Series Page 171 User Manual Download

Page: 171 / 293

171

Going Out Detection

When configuring a camera, a detection area can be specified for Going Out

Detection. After the detection area is specified, detection can be activated and

an alarm handling scheme configured in this menu.

Clicking on the

Detail

button will pull up a menu listing all the devices with the

Going Out Detection active.

From this menu, click the checkboxes next to the cameras that have Going Out

Detection configured. Optionally, check the

All Cameras

check box to use all

the cameras available. Click the

button to exit the menu.

Missing Object Detection

When configuring a camera, an object can be specified for Missing Object

Detection. After the object is specified, detection can be activated and an

alarm handling scheme configured in this menu.

Clicking on the

Detail

button will pull up a menu listing all the devices with

Missing Object Detection active.

Summary of Contents for NVR2100 Series






































































































































































































































































































Search results

Summary of Contents for NVR2100 Series

Reviews:

Related manuals for NVR2100 Series

Brands by name

Popular brands

Surveon NVR2100 Series, User Manual

Search results

Summary of Contents for NVR2100 Series

Reviews:

Related manuals for NVR2100 Series

Brands by name

Popular brands