277
1.
Enter an IP range in the two IP fields. The first IP address should be
lower than the second IP address.
2.
Click either
Add to Whitelist
or
Add to Blacklist
to add the IP range to
the whitelist or blacklist respectively.
3.
Repeat the first two steps to set up the blacklist and whitelist. You can
select ranges that have already been configured from the list and click
Delete
to delete them.
4.
When completed, click either
Enable Whitelist
to allow only the IP
ranges on the whitelist to access the Server, or
Enable Blacklist
to block
all the IP ranges on the blacklist from accessing the Server.
5.
Click
OK
to save your changes.
Edit NVR
Users can change both the setting of the stream port and the IP address by
editing the Server.
Web Server
For users who want to use the Web Client/SPhone Client, please fill in the
following information for the Web Server settings.