Surveon NVR2100 Series User Manual Download Page 169

Page: 169 / 293

169

From this menu, click the checkboxes next to the cameras that have General

Motion Detection configured. Optionally, check the

All Cameras

check box to

use all the cameras available. Click the

button to exit the menu.

Foreign Object Detection

When configuring a camera, a detection area can be specified for Foreign

Object Detection. After the detection area is specified, detection can be

activated and an alarm handling scheme configured in this menu.

Clicking on the

Detail

button will pull up a menu listing all the devices with the

Foreign Object Detection active.

From this menu, click the checkboxes next to the cameras that have Foreign

Object Detection configured. Optionally, check the

All Cameras

check box to

use all the cameras available. Click the

button to exit the menu.

Forbidden Area Detection

When configuring a camera, a detection area can be specified as forbidden for

the Forbidden Area Detection function. After the area is specified, detection

can be activated and an alarm handling scheme configured in this menu.

Clicking on the

Detail

button will pull up a menu listing all the devices with the

Forbidden Area Detection active.

Summary of Contents for NVR2100 Series






































































































































































































































































































Search results

Summary of Contents for NVR2100 Series

Reviews:

Surveon NVR2100 Series, User Manual, Page: 169 / 293

Search results

Summary of Contents for NVR2100 Series

Reviews: