4-8
S
UPER P3TDDE User’s Manual
4-4.2
Advanced Chipset Features
Typematic Rate (Chars/Sec)
If enabled, the option allows the user to set the number of times a key stroke
repeats itself in a second when the key is held down. The settings are "
6
",
"8", "10", "12", "15", "20", "24" and "30".
Typematic Delay
The option sets the delay time after a key is held down before it begins to
repeat the keystroke. The settings are "
250
", "500", "750" and "1000".
MPS Version Control for OS
This option sets the modes of the MPS Version Control for the operating
system. The settings are "
1.4
" and "1.1".
OS Select For DRAM > 64MB
The option allows the user to select the operating system that requires a
DRAM memory greater than 64 MB in order to function properly. The
settings are "OS2", and "
Non OS2
".
Power On after PWR Fail
This option allows the user to determine if the system's power will be
automatically turned "on" or remain "off" after power is restored after an
outtage. The settings are "On", "
Off
" and "Former Status".
Summary of Contents for SUPER P3TDDE
Page 1: ...SUPER P3TDDE USER S MANUAL Revision 1 0c SUPER...
Page 9: ...Chapter 1 Introduction 1 3 Introduction SUPER P3TDDE Figure 1 1 SUPER P3TDDE Image...
Page 44: ...3 6 SUPER P3TDDE User s Manual Notes...
Page 70: ...4 26 SUPER P3TDDE User s Manual Notes...
