Supero SUPER P3TDDE, User Manual

Page: 49 / 96

Chapter 4: BIOS/Setup
4-5
IDE Primary Master UDMA / IDE Primary Slave UDMA /
IDE Secondary Master UDMA / IDE Secondary Slave UDMA
This option is available only when your IDE hard drive supports Ultra DMA/
33 and the operating environment also includes a DMA drive (Windows 95
OSR2 or a third-party IDE bus master driver). If your IDE hard drive and
your system software both support Ultra DMA/33, select "Auto" to enable
BIOS support. The settings are " Auto ", and "Disabled".
Video
This option allows the user to select the setting for the default video device.
The settings are " EGA/VGA ", "CGA 40", "CGA 80", and "MONO".
HaltOn
This option allows the user to select the situation in which you want the
BIOS to stop the POST process and notify you about the status of the
system. The settings are "All Errors", "No Errors", " All, but Keyboard ",
"All, but Diskette" and "All, but Disk/Key".
Base Memory
This field displays the amount of conventional memory detected during boot-
up. This is normally set to "640K".
Extended Memory
This feature displays the amount of extended memory detected during boot-
up. This is normally set to "65535K".
Total Memory
This feature displays the amount of total memory available in the system.
This is normally set to "1024K".