Supero SUPER P3TDDE, User Manual

Page: 24 / 96

2-4
S
UPER P3TDDE User’s Manual
Figure 2-2. Installing SDRAM Module into DIMM Slot
2-4 Installing DIMMs
CAUTION
Exercise extreme care when installing or removing DIMM modules
to prevent any possible damage.
Memory Module Installation (See Figure 2-2)
1. Install SDRAM memory modules into DIMM slots.
2. Insert each memory module vertically into its slot. Pay attention to
the two notches along the bottom of the module to prevent inserting
the DIMM incorrectly.
3. Gently press down on the memory module until it snaps into place.
4. Four PC133 SDRAM sockets support up to 4 GB of PC133 unbuffered,
registered SDRAM. ECC type memory is supported. PC133 and
PC100 memory are both fully supported at their respective speeds.
To Install:
Insert module
vertically and
press down
until it snaps
into place.
Pay attention
to the two
notches.
Note: Notch
should align
with the
receptive point
on the slot
Notch Notch
Release
Tab
Release
Tab
DIMM