Supero SUPER P3TDDE, User Manual

Page: 47 / 96

Chapter 4: BIOS/Setup
4-3
Main BIOS Setup Menu
Main Setup Features
Date/Time
Set the system date and time. Key in the correct information in the fields
when the options of "Month, DD, YYYY" and "HH:MM:SS" appear in the
screen. Press the <Enter> key to save the data.
Drive A/Drive B
These options allow the user to set the type of floppy disk drive installed in
the system. The settings are: "None", "360K, 5.25in", "1.2M, 5.25in", "720K,
3.5in", "1.44M, 3.5in", "2.88M, 3.5in".
Swap Floppy Drive
These options allow the user to swap the names of floppy disk drives
installed in the system, should there be two floppy disk drives installed on
the main board. The settings are: "Disabled" and "Enabled." The default
setting is "Disabled".
IDE Primary Master/IDE Primary Slave/IDE Secondary Master/
IDE Secondary Slave
These options allow the user to set the parameters of the IDE Primary
Master/Slave and IDE Secondary Master/Slave slots. Hit <Enter> to activate
the following sub-menu screen for detailed options of these items. Set the