Chapter 4: BIOS/Setup
4-17
PNP OS Installed
Select "Yes" if you are using an operating system that supports Plug and
Play solutions. Select "
No
" if you need the BIOS to configure non-boot
devices.
Reset Configuration Data
If you have installed a new add-on device and it has caused conflicts in
system configuration that results in a system boot-up failure, then select
"Enabled" to reset "Extended System Configuration Data" (ESCD) for the
OS to reboot the system. The settings are "Enabled" and "
Disabled
".
Resources Controlled By
AwardBIOS can automatically configure all the boot devices and all Plug and
Play compatible devices. However, if this item is set to "Auto (ESCD)", the
user will not be able to set the IRQ DMA and memory address since the
Award BIOS will automatically assign the values to these fields. The
settings are "
AUTO (ESCD)
" and "Manual."
PCI/VGA Palette Snoop
For best system performance, this item has been preset to "Disabled" by
the manufacturer. The settings are "Enabled" and "
Disabled
".
Assign IRQ for VGA
If "Enabled", you allow AwardBIOS to assign an IRQ for the VGA devices.
The settings are "
Enabled
" and "Disabled".
Assign IRQ for USB
If "Enabled", you allow the AwardBIOS to assign IRQ for the USB devices.
The settings are "
Enabled
" and "Disabled".
Summary of Contents for SUPER P3TDDE
Page 1: ...SUPER P3TDDE USER S MANUAL Revision 1 0c SUPER...
Page 9: ...Chapter 1 Introduction 1 3 Introduction SUPER P3TDDE Figure 1 1 SUPER P3TDDE Image...
Page 44: ...3 6 SUPER P3TDDE User s Manual Notes...
Page 70: ...4 26 SUPER P3TDDE User s Manual Notes...
