5-6
S
UPER P3TDDE
User's Manual
7. Click on “Next.” A message informing you that Windows Millennium has found
“Windows Millennium Promise FastTrak100 Controller” should appear.
8. Click on “Next,” and then on “Finish.”
9. Choose “Yes” when asked if you want to restart your computer. Be sure to eject
the diskette from drive A:.
Confirming Driver Installation in Millennium
To confirm that the driver has been properly loaded in Millennium, perform the following
steps:
1. Choose “Settings” from the “Start” menu.
2. Choose “Control Panel,” and then double-click on the “System” icon.
3. Choose the “Device Manager” tab, and then click the “+” in front of “SCSI & RAID
controllers.” “Windows Millennium Promise FastTrak100 Controller” should appear.
Windows 95/98
Installing Drivers During Windows 95/98 Installation
The following three sections detail the installation of the FastTrak100 drivers while
installing Windows 95/98 (with the FastTrak100 controller card already in place). If
you are installing the FastTrak100 drivers on a system with Windows 95/98 already
installed, see “Installing Drivers with Existing Windows 95/98” on page 5-7.
Windows 98
1. After installing the FastTrak100 controller card and configuring the hard drive(s),
partition and format your hard drive(s), if necessary.
2. Install Windows 98 normally.
3. After installation, go the “Start” menu and choose “Settings.”
4. From the “Settings” menu, choose “Control Panel.”
5. In the “Control Panel” window, double-click on the “System” icon.
6. In the “System” window, choose the “Device Manager” tab.
7. In the hierarchical display under “Other Devices” is a listing for “PCI RAID Controller.”
Choose it and then press the “Properties” button.
8. Choose the “Driver” tab in the “Properties” window, choose “Update Driver,” and
then press “Next.”
9. Choose “Search for a better driver than the one your device is using now
(recommended),” then press “Next.”
10. Choose “Specify Location,” and then type “A:\WIN95-98” in the text box.
11. Insert the “FastTrak100 Driver” diskette into the A: drive.
12. Press the “Next” button. A message informing you that Windows 98 has found
“Win95-98 Promise FastTrak100 (tm) Controller” should appear.
Summary of Contents for SUPER P3TDDE
Page 1: ...SUPER P3TDDE USER S MANUAL Revision 1 0c SUPER...
Page 9: ...Chapter 1 Introduction 1 3 Introduction SUPER P3TDDE Figure 1 1 SUPER P3TDDE Image...
Page 44: ...3 6 SUPER P3TDDE User s Manual Notes...
Page 70: ...4 26 SUPER P3TDDE User s Manual Notes...
