Sunrise telecom XTT 5000, User Manual

Page: 91 / 181

RFC2544/NE Testing
RFC2544 Applications Home
XTT 5000 uses UDP echo request frames, as specified by RFC2544.
See the application diagram .
RFC2544 Throughput Test
RFC2544 is an automated test which will transmit a variety of frame lengths at
different frame rates to find the optimal performance of the device under test (DUT).
The signal configuration is the same as BERT, but without the need to specify frame
length, traffic setting, or test pattern. The Test Layer selection and Stream Table for
RFC2544 is identical to that for BERT.
To configure an RFC2544 throughput test , select RFC2544NE Test as the test
mode on the drop down menu . Configure the Layer and Filter Selection (if desired).
Only 1 stream is allowed.
RFC2544 NE Stress Test
In a Network Element (NE) stress test, tests are performed incrementally for each
frame size. NE tests are particularly useful for longer burn-in tests.
To configure an NE stress test , select RFC2544.NE Test as the test mode on the
drop down menu , then set the Test Mode to NE Test on the Test Sequence tab. On
the Throughput Latency tab , set the Starting and Stop Rates as well as the Step
Size.
Press
then on the Action Bar to start a test.
Where do you want to go next?
RFC2544 Throughput Test Setup
RFC2544 NE Stress Test Configuration
RFC2544 Applications
RFC2544 Summary Results
IP Test Setup
Throughput Test Setup
Home
85