Sunrise telecom XTT 5000, User Manual

Page: 62 / 181

XTT 5000 User's Manual
Stream MAC Setup Home
Configure Layer 2 by setting the MAC Source and Destination addresses for the
streams.
Touch a MAC address on the Stream Table to bring up this configuration window;
configure the Source and Destination addresses separately. See Auto Fill to configure
multiple streams.
Parameter Options Details
Frame Type IEEE
802.3,
Ethernet II
Select the Ethernet standard to use.
Ethertype IEEE
802.3 :
Ethertype=
Length.
Ethernet
II : 64-
5535.
Enter the
Ethertype
value in its
field.
Choices depend on the Frame Type.
802.3 Note : LLC and SNAP appears.
Some Ethertype values, such as 0800
and AAAA, are considered invalid. To
avoid potential problems with how a
network device interprets the Ethertype
field, 0800 is automatically chosen when
IP is selected for the frame setup.
MAC
Source/Destination
Enter the
address.
Touch the MAC field. Use the number pad
which appears to enter the data.
• Each MAC address source and
destination pair defines traffic flow.
Default MAC
Source Reset the MAC source address of that port
to the factory set default.
The settings for each port, along with the
factory settings of the MAC addresses can
be found on System> Port Address .
LLC On, Off Toggle the LLC protocol On or Off; 802.3
only.
SNAP On, Off Toggle the LLC protocol On or Off; 802.3
only.
Where do you want to go next?
Throughput Stream Table Setup
Throughput Summary Results
Throughput Aggregate Results
Throughput Stream Results
Home
56