Sunrise telecom XTT 5000, User Manual

Page: 118 / 181

XTT 5000 User's Manual
• If connected to a DHCP network, selecting DHCP will configure the IP Address
Subnet, Gateway, and possibly D ,
NS if Auto (DHCP) is checked as well. If Auto
, as well as
t
Note : The DHCP Status, if enabled, will appear in the DHCP Status field.
or Static Source IP Mode.
s :Enter the unit's IP source address.
.000.000.
wish to
ping a URL rather than an IP address.
1-3 VLAN tags, and configure them
(DHCP) is not checked, then a static IP address must be entered
he Subnet mask and Gateway.
• For DHCP networks, see the Details field for more information.
• Configure the remaining IP Setup items f
STATIC SOURCE IP MODE Parameters
Source IP Addres
Gateway : Enter the STT gateway address. If there's no gateway, enter
000.000
Subnet : Enter the STT subnet mask value. 255.255.255.000 is the most common
value.
DNS : Enter the IP address of the DNS server. This is only required when you
VLAN : If required, select appropriately.
Procedure, continued
3. Select the Ping Setup tab.
Ping Delay : 50-1000 ms; this is the delay between pings—affects the rate.
Ping Rate : 1-20; this is the rate at which pings are transmitted. Typical values used
the Ping Delay
ter the length of the ping; 64 bytes is common.
is also used frequently.
he Time to Live value (in hops).
th : Set to Off..
n
are 500 ms delay of 2 pings per second. This is read only, based on
setting.
Frame Length : En
# Ping Packets : Enter a number of pings of which the test will consist; 4 is
common, though
Continuous : Send pings continuously . Continuous
Time to Live (TTL) : Enter t
Time Ou t: Enter the time-out period, in seconds
Ping of Dea
Destinatio IP Address
: Use the Number Pad to enter the IP address to send the
ping to.
4. Press
then on the Action Bar to begin the IP test. Measurement wind
include: Ping Result, Ping De
ows
tails and TX and RX Statistics.
e test.
d
lts.
• Go to the Ping Detail tab to get additional details on the transmitted ping
ou want to go next?
• Look for the Ping messages in the Status field. This lets you track the
progress of th
• View the Ping results on the right side of the window, under Round Trip an
• Ping Resu
packets.
Where do y
IP Test Setup
IP Testing
Throughput Test Setup
RFC2544 Applications
Home
112