Sunrise telecom XTT 5000, User Manual

Page: 12 / 181

XTT 5000 User's Manual
Working Desktop Home
Windows System
Notes
Important Information
Hardware Notes
XTT 5000 is a touch-screen unit. Use your finger or the stylus to make selections.
Often, a
number pad will appear for use in entering alphanumeric data. The Status
Bar is the black row at the top of the screen; it provides system information. The
Action Bar of buttons at the bottom of the screens gives access to many functions.
Here is an overview:
• Touch buttons to activate (single touch/click) the function, or to open (double
touch/click) their configuration screens.
• Button colors have meaning: blue-available button; orange-active
selection, light gray-unavailable button.
• Press to save changes and apply your new settings. When asked to verify
changes, = Yes and = No (cancel).
• Press to begin taking measurements. Press to stop a test.
• The 'Results' button ( ) at the top right takes you to the results screens,
but doesn't actually start a test.
• Press to select a new test mode from the drop down menu . The
horizontal Menu Bar tabs will change depending on the test type (shown on
the Module Status panel; Throughput, RFC2554, etc.) selected. Touch a menu
tab label to see the items in that menu.
Status Bar : Located at the top of the screen.
Section Information
Soft virtual LEDs show the logical and physical state of
the selected port.
Module Status Panel: Get module data, such as the
port, test mode and transmission status.
System Status Panel: Get system-related information,
including the battery charge status, and the '?' button,
which is used to access this Help system. Press '?'
again to exi
t Help
Menu
Select a new test mode from the drop down menu .
Results
On the setup screens, press 'Results' to go to
measurement results.
6