Sunrise telecom XTT 5000, User Manual, Page: 125 / 181

IP Ping Testing
VLAN Frames View Single Tag VLAN Frames Current and Average
Frame rates, and Current and Average Single Tag VLAN
Frames bandwidth utilization statistics.
Multi-Tagged
VLAN Frames
Number of frames containing exactly more than one VLAN
tag.
View
Multi-Tagged VLAN Frames Current and Average
Frame rates, and the Current and Average Multi-Tagged
VLAN Frames bandwidth utilization statistics.
MPLS Frames Number of frames containing MPLS labels.
View MPLS Frames Current and Average Frame rates,
and the Current and Average MPLS Frames bandwidth
utilization statistics.
IPv4 Frames Number of frames containing version 4 IP.
View:
IPv4 Frames Current and Average Frame rates
IPv4 Current and Average IPv4 Frames bandwidth
utilization statistics.
IPv4 Multicast Current and Average Frame Rates , as
well as Current and Average utilization rates.
IPv4 Broadcast Current and Average Frame Rates , as
well as Current and Average utilization rates.
TCP Frames Number of frames containing TCP.
View TCP Frames Current and Average Frame rates, and
the Current and Average TCP Frames bandwidth
utilization statistics.
UDP Frames Number of frames containing TCP.
View
UDP Frames Current and Average Frame rates,
and the Current and Average UDP Frames bandwidth
utilization statistics
Pause
Frames Count of received pause frames.
Frame Gap View the Minimum , Maximum , and Average frame gap.
The minimum IPG is 12 bytes or 96 bit times.
Service
Disruption
Events
Count of received service disruptions.
Service Disruption Duration : The longest packet interval
detected during the measurement is displayed in
microseconds.
Service Disruption Min/Max/Avg : Minimum, Maximum,
and Average disruptions.
Latency
Min/Max/Avg Measures the time it takes for each test frame to pass
through the device under test.
Sunrise Tagging required.
View Minimum, Maximum, and Average statistics.
These measurements assume a loopback at the far end. If
you have two units back to back, the latency results will be
erroneous.
LOS Count of the number of times signal has been lost (LOS).
LOSS Count of seconds of loss of signal: Minimum, Maximum,
Current and Average.
LOSync Count of the number of times synchronization has been lost
View the Seconds and Min, Max, Current, and Average counts
of LOSync.
FCS/CRC Count of frames containing FCS/CRC error codes.
119