Sunrise telecom XTT 5000, User Manual

Page: 74 / 181

XTT 5000 User's Manual
Stream - Constant Traffic Shape Setup Home
From the Throughput Stream Table Traffic Shape tab or via Signal 'Traffic Shape',
configure the traffic.
Parameter Options Details
Constant
Bandwidth 0.00% to
100.00% Enter the percentage of bandwidth which will
be constantly filled directly in the field.
Rate Percentage,
Bit Rate, IPG
(ns)
Determine the traffic rate.
When changing units from Percentage to IPG
to Bit Rate, the display will reset back to the
last value entered for those units.
Percentage Range:
0.01% to
100.00%
Commonly, Ethernet traffic is referred to in
terms of the percentage of bandwidth used.
At 100%, the gap between frames is at its
minimum.
As the percentage is reduced, the IPG is
increased.
IPG (ns) Set the interpacket gap .
The minimum IPG is 12 bytes or 96 bit times.
Bit Rate The bit rate, given as a number of kbps, is a
direct function of the bandwidth percentage.
1 kbps corresponds to 0.00001% of a 10GE
LAN interface.
Because the frame length can be random,
there is no fixed relationship between the bit
rate and the data rate.
Press to apply the new settings and close the window.
Where do you want to go next?
Throughput Stream Table Setup
Throughput Applications
Throughput Summary Results
Throughput Aggregate Results
Throughput Stream Results
Throughput Test Setup
Home
68