Sunrise telecom XTT 5000, User Manual, Page: 39 / 181

Port Setup
RJ-45 Port Setup: Auto-Negotiation Off Home
Select a test from the menu in order to access the port configuration tabs.
Auto Negotiation : The unit will auto-negotiate with the link partner, selecting the
highest mutually compatible rate between the two ports.
• The port settings (including line rate, duplex, pause, etc) are negotiated
following the appropriate IEEE standards.
• If you set Auto Negotiation to on , you can set how the XTT 5000 advertises
itself.
When Auto Negotiation is set to Off, configure the following:
Parameter Options Description
Port Rate 10M, 100M, 1000M Set the line rate
Port Duplex Full Duplex, Half
Duplex Configure the Ethernet mode.
Pause On, Off Set if the local device will respond
to pause packets.
RJ-45
Polarity
AUTO, Straight,
Cross
Determine the wiring polarity of
the Ethernet Port.
Pause
Frame
Delay
0-335,539 Set the length of time indicated by
the Pause frame sent by the
module.
Where do you want to go next?
Throughput Test Setup
RFC2544 Applications
Home
33