Sunrise telecom XTT 5000, User Manual

Page: 60 / 181

XTT 5000 User's Manual
Stream - Auto Fill Home
On the Throughput Stream Table , press 'Auto Fill' to configure the stream element/s
(MAC, VLAN, etc) of multiple streams at one time.
On the Stream Auto Fill popup, configure the fill parameters :
1. Select the frame element to configure, using the 'Auto Fill Item' button.
2. Enter the required Auto Fill Item data.
Example : if you had pressed 'Auto Fill Item' and selected MAC Destination
(to appear as 'Auto Fill Item MAC Destination'), the button below would
appear as 'MAC Destination'. Press it, then enter the starting MAC
Destination address.
Auto Fill Action
To access all the Auto Fill options, you must have 2 or more streams.
Parameter Details Action
Fixed The frame element settings
will be identical for all
active streams.
Apply the Fixed value to or from
the current stream, or from the
first stream.
Increment The frame element settings
will increase by one each
time.
Press 'From Stream' to enter the
number of the stream to start
applying the Incremented value
from.
Press 'To Stream' to enter the
number of the stream to stop
applying the Incremented value
to.
Decrement The frame element settings
will decrease by one each
time.
Set the 'From Stream' and 'To
Stream' values as described
above.
Random The last several bytes of
the setting are filled with a
random value.
Only the last 1, 2, or 3 bytes of
the frame element address are
determined randomly.
The value of the other bytes is
based on the value entered in the
item button (e.g. 'MAC
Destination' value).
Set the 'From Stream' and 'To
Stream' values as described
above. Addresses are not changed
during the test.
Where do you want to go next?
Stream Table Setup
Throughput Applications
Throughput Summary Results
Throughput Aggregate Results
Throughput Stream Results
Throughput Test Setup
54