Sunrise telecom XTT 5000, User Manual

Page: 107 / 181

RFC2544/NE Testing
RFC2544 Summary Results Home
View the overall RFC2544 results, including a Status report, such as "Pass” or "Fail"
NE test results include the throughput status for each frame rate, with "Pass” or
"Fail" result.
For Throughput, the "Pass/Fail” message is an indication of whether or not any
frames were lost during the test. This has no bearing on the Thresholds set in the
configuration.
Left Side Results Table
Statistic Meaning
Seq#
Sequence number denoting the order and repetitions of the tests.
Test Type of test.
Size Frame size under test.
Rate The throughput rate currently being tested is reported, in
percentage of bandwidth.
Frames Number of frames tested. Applies to Back-to-Back frames test.
Status Test status; pass/fail, percentage of frames lost.
Status
Statistic Meaning
RT
Remaining Time for the test in progress. Once the test is
completed, the results of the test will be indicated.
TX
Utilization
Transmitted percentage bandwidth utilization
TX Line
Rate
Transmitted data rate (in kbps, bps, etc.).
TX Data
Rate Transmit data rate (in kbps, bps, etc.).
RX
Utilization Received percentage bandwidth utilization.
RX Line
Rate
Receive data rate (in kbps, bps, etc.).
RX Data
Rate Receive data rate (in kbps, bps, etc.).
Signal
The signal information for optical interfaces (vendor, wavelength, optical power, etc.)
is provided by the SFP module. Not all manufacturers supply this information, and
Sunrise Telecom Inc. is not responsible for modules provided by other vendors.
• Vendor : Name of the vendor;
• Wavelength : Optical wavelength is use at the port.
• RX Optical Power : Received uW and dBm.
Where do you want to go next?
RFC2544 Summary Results
101