Sun Microsystems Ultra 5, Service Manual

Page: 146 / 258

7-18 Sun Ultra 5 Service Manual • February 2000
4. Replace the CPU fan assembly.
See Section 6.4.2 “Replacing the CPU Fan Assembly” on page 6-13.
5. Replace the diskette drive assembly (or optional secondary hard drive bracket):
a. Place the diskette drive bracket back in position, aligning the three holes in the
bracket with the three securing screws on the chassis (see
FIGURE 7-1
).
b. Slide the diskette drive bracket forward until it stops.
c. Using a No. 2 Phillips screwdriver, tighten the three securing screws.
6. Connect the following to the rear of the CD-ROM drive:
■
CD-ROM drive cable connector
■
Power cable connector
■
Audio cable connector
Note –
Verify that the cable connectors are oriented properly by aligning the
connector keys.
7. Detach the wrist strap, replace the system cover, and power on the system as
decribed in Chapter 10.