Sun Microsystems Ultra 5, Service Manual

Page: 123 / 258

Chapter 6 Major Subassemblies 6-11
ii. Slide the diskette drive bracket back and lift it from the three screws. Do not
remove any of the cables attached to the diskette drive.
iii. Set the diskette drive bracket on top of the power supply.
c. Grasp the speaker magnet and pull the speaker away from the chassis while
moving it downward.
d. Remove the speaker assembly from the chassis.
FIGURE 6-6
Removing and Replacing the Speaker Assembly
6.3.2 Replacing the Speaker Assembly
1. Replace the speaker assembly as follows (
FIGURE 6-6
):
a. Position the speaker assembly into the chassis.
b. Grasp the speaker magnet and slide the speaker upwards under the three metal
chassis speaker tabs until the lower tab engages the outer rim of the speaker.
c. Replace the diskette drive assembly (or optional secondary hard drive bracket):
i. Place the diskette drive bracket back in position, aligning the three holes in
the bracket with the three securing screws on the chassis (see
FIGURE 7-1
).
Speaker assembly