Sun Microsystems Netra t 1120, Service Manual, Page: 97 / 148

Chapter 10 Motherboard and Component Replacement 10-5
3. Remove the top access cover.
See Section 7.2 “To Remove the Top Access Cover” on page 7-4.
4. Remove the CPU module(s).
See Section 10.1.1 “To Remove a CPU Module” on page 10-2.
5. Unplug the fan connectors from the motherboard and the power supply.
6. Using a No. 1 Phillips screwdriver, loosen the two captive screws securing the
bracket to the motherboard (see
FIGURE 10-3
).
Tilt the bracket slightly to disengage the locating lugs from the keyholes in the
motherboard and lift it off.
FIGURE 10-3
Removing the Dual Processor Bracket
Rear locating lug
Screwdriver insertion points
Front locating lug
(behind fan)