Sun Microsystems Netra t 1120, Service Manual

Page: 86 / 148

9-4 Netra t 1120/1125 Service Manual • August 1998
9.1.2 To Install a Hard Disk Drive
Caution –
Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Attach the wrist strap.
See Section 7.1 “To Attach the Wrist Strap” on page 7-1.
2. Power off the system and remove the input power connector(s).
See Section 6.2 “To Power Off the System” on page 6-3.
3. Holding the drive handle, insert the drive into the drive bay.
4. Push the front of the drive to connect it to the SCSI bus.
5. Close the drive handle to lock the drive into the system.
6. Replace the front ESD screen using a No.1 Phillips-head screwdriver.
7. Replace the front access cover.
8. Detach the wrist strap.
!