Sun Microsystems Netra t 1120, Service Manual

Page: 88 / 148

9-6 Netra t 1120/1125 Service Manual • August 1998
FIGURE 9-2
Removing and Replacing the CD-ROM or Tape Drive
9.2.2 To Install a Removable Media Drive
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Attach the wrist strap.
See Section 7.1 “To Attach the Wrist Strap” on page 7-1
2. Power off the system and remove the input power connector(s).
See Section 6.2 “To Power Off the System” on page 6-3.
3. Remove the top cover.
See Section 7.2 “To Remove the Top Access Cover” on page 7-4.
Captive screws
!