Sun Microsystems Netra t 1120, Service Manual

Page: 72 / 148

8-2 Netra t 1120/1125 Service Manual • August 1998
3. Remove the top access cover.
See Section 7.2 “To Remove the Top Access Cover” on page 7-4.
FIGURE 8-1
Netra t 1120 DC Power Connectors and Earth Points
FIGURE 8-2
Netra t 1125 AC Power Inlet and Earth Points
4. Using an 8mm wrench, remove the primary earth connection by removing the M5
nut and captive washer.
5. Using an 8mm wrench, remove the logic ground connection by removing the two
M5 nuts and captive washers.
DC power connectors
Logic ground
Primary earth
AC power inlet
Logic ground
Primary earth