Sun Microsystems Netra t 1120, Service Manual, Page: 40 / 148

3-14 Netra t 1120/1125 Service Manual • August 1998
3.4.2
diag-level
Variable Set to
min
When
diag-level
is set to
min
, POST enables an abbreviated set of diagnostic-
level tests. This mode requires approximately three minutes to complete.
CODE EXAMPLE 3-2
identifies a serial port A POST output with
diag-level
set to
min
.
Probing /pci@1f,4000 at Device 2 Nothing there
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,4000 at Device 5 Nothing there
Probing /pci@1f,2000 at Device 1 Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Sun Ultra 60 UPA/PCI (2 X UltraSPARC-II 296MHz), No Keyboard
OpenBoot 3.11, 128 MB memory installed, Serial #9637699.
Ethernet address 8:0:20:93:f:43, Host ID: 80930f43.
CODE EXAMPLE 3-2 diag-level
Variable Set to
min
Hardware Power ON
Master CPU online
Master Version: 0000.0000.1700.1120
Slave Version: 0000.0000.1700.1120
CPU E$ (M) 0000.0000.0020.0000 (S) 0000.0000.0020.0000Button Power
ON
Master CPU online
Master Version: 0000.0000.1700.1120
Slave Version: 0000.0000.1700.1120
CPU E$ (M) 0000.0000.0020.0000 (S) 0000.0000.0020.0000
Probing keyboard Done
%o0 = 0000.0000.0000.2001
Executing Power On SelfTest
0>
0>@(#) Sun Ultra 60(UltraSPARC-II 2-way) UPA/PCI POST 1.0.8 01/21/
1998 02:36 PM
0>INFO: Processor 0 is master.
0>
0> <00> Init System BSS
0> <00> NVRAM Battery Detect Test
0> <00> NVRAM Scratch Addr Test
CODE EXAMPLE 3-1 diag-level
Variable Set to
max
(Continued)