Sun Microsystems Netra t 1120, Service Manual

Page: 78 / 148

8-8 Netra t 1120/1125 Service Manual • August 1998
8.2.2 To Replace the ON/STBY Switch Assembly
Caution –
Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Attach the wrist strap.
See Section 7.1 “To Attach the Wrist Strap” on page 7-1.
2. Feed the switch assembly power connector through the chassis front.
3. Position the switch assembly into the chassis housing and snap it into place.
4. Connect the switch connector to the LED card.
5. Replace the top access cover.
See Section 7.3 “To Replace the Top Access Cover” on page 7-6.
6. Detach the wrist strap.
!