Sun Microsystems Netra t 1120, Service Manual

Page: 94 / 148

10-2 Netra t 1120/1125 Service Manual • August 1998
10.1 CPU Modules
10.1.1 To Remove a CPU Module
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Attach the wrist strap.
See Section 7.1 “To Attach the Wrist Strap” on page 7-1.
2. Power off the system and remove the input power connector(s).
See Section 6.2 “To Power Off the System” on page 6-3.
3. Remove the top access cover.
See Section 7.2 “To Remove the Top Access Cover” on page 7-4.
4. Using both thumbs, simultaneously lift the two levers on the CPU module
upward and to the side.
See
FIGURE 10-1
below.
FIGURE 10-1
CPU Module Levers
!
CPU module
Levers