Sun Microsystems Fire X4800, Installation Manual

Page: 98 / 142

▼
How to Power On All Server Components
This procedure powers on all server components and is different from applying standby power,
which powers on the service processor only.
Verify that power cords have been connected and that standby power is on.
In standby power mode, the Power/OK LED on the front panel blinks.
Press and release the Power button on the server front panel.
When main power is applied to the full server, the Power/OK LED next to the Power button
remains lit and no longer blinks.
Figure Legend
1 Power/OK LED
2 Locate button/LED
“Powering the Server On and Off” on page 97
▼
How to Power Off the Server
To power off the server from main power mode, use one of the following two methods:
2 1
5-2M
5-2M
5-2M
5-2M
5-2M
5-2M
5-2M
5-2M
1
2
See Also
●
Powering the Server On and Off
Sun Fire X4800 Server Installation Guide • —12, March 2011 98