Sun Microsystems Fire X4800, Installation Manual

Page: 88 / 142

“How to Insert the Server Into the Rack” on page 72
▼
How to Remove the Rack Mounting Hardware from
the Rack
This task shows how to remove the rack mounting hardware from the universal rack and from
the standard rack. This task is similar for each; however the universal rack is shown.
In this procedure, the differences between the universal rack and the standard rack are trivial,
except where they are noted.
Remove the four locking screws (1).
Perform this step for the universal rack mounting kit only. The standard rack mounting kit does
not include these screws.
See the following figure.
Lift the two shelf rails (2) to disengage the hooks from the adapter brackets.
You can compress the shelf rails once you have disengaged the hooks from the adapter brackets.
See Also
1
2
Removing the Server From the Rack
Sun Fire X4800 Server Installation Guide • —12, March 2011 88