Sun Microsystems Fire X4800, Installation Manual

Page: 74 / 142

Use four screws to attach the front bezel of the server to the front of the rack, as shown in the
following figure.
■
For square-hole racks, use four M6 x 16 screws.
■
For round-hole racks, use four M6 x 12, or four 10-32 x 10 screws.
Note –
On square-hole racks, the screws pass through the rack and thread into the adapter
bracket. On round-hole racks, the screws thread into to the rack rails.
Move the rear braces so they are snug against the server chassis. See the following figure.
From the rear of the system:
a. Loosen the screws (1).
b. Slide the braces down (2).
c. Tighten the screws (1).
3
4
Installing the Server in a Rack Using the Universal Rack Mounting Kit
Sun Fire X4800 Server Installation Guide • —12, March 2011 74