Sun Microsystems Fire X4800 Installation Manual Download Page 44

Page: 44 / 142

b. Reinstall the adapter brackets and the server, and install the rear shipping bracket cage nuts

as you install the rear adapter brackets. This is included in the rack mounting procedure.

See

“How to Install the Rack Mounting Hardware in Standard Rack” on page 31

Insert the rear top shipping bracket (1) over the back of the server with the side panels facing
down.

Use four screws (2) to fasten it to the rack (4).

Insert the rear bottom shipping bracket (3) under the back of the server with the side panels
facing up.

Use four screws (4) to fasten it to the rack.

Removing and Installing the Standard Rack Mounting Kit Shipping Brackets

Sun Fire X4800 Server Installation Guide • —12, March 2011

Summary of Contents for Fire X4800















































































































































Search results

Summary of Contents for Fire X4800

Reviews:

Related manuals for Fire X4800

Brands by name

Popular brands

Sun Microsystems Fire X4800, Installation Manual

Search results

Summary of Contents for Fire X4800

Reviews:

Related manuals for Fire X4800

Brands by name

Popular brands