Sun Microsystems Fire X4800, Installation Manual

Page: 79 / 142

Insert the rear bottom bracket (1) under the back of the server with the side panels facing up, as
shown in the following figure.
Use four screws (2) to fasten it to the rack. Do not finish tightening these screws. They should be
tight enough to hold the bracket in place, but you should still be able to move the bracket
slightly.
■
For square-hole racks, use the two screws that you removed in Step 5.
■
For round-hole racks, use either 10-32 x 10 or M6 x 12.
1
2
3
!
6
Installing and Removing the Universal Rack Mounting Kit Shipping Brackets
79