Sun Microsystems Fire X4800, Installation Manual

Page: 15 / 142

Unpacking the Server and Identifying the Rack
Mounting Hardware
This section provides procedures for unpacking the server and identifying the rack mounting
hardware.
■
To unpack your server, see “How to Unpack the Server” on page 15 .
■
To identify the rack mounting hardware and the correct rack mounting instructions, see
“How to Identify Your Rack Mounting Kit” on page 17 .
▼
How to Unpack the Server
The following figure shows the packaging components.
Open the top of the box (1).
a. Cut the straps.
b. Cut or remove the tape.
c. Open the flaps.
Lift the box (1) away from the server.
Remove the accessory tray (2) and set it and its contents aside.
Remove the foam inserts (4).
When it is time to install the server (5) in the rack, either:
■
Remove the server (5) from the pallet (6).
■
Use a mechanical lift to raise the pallet with the server on it to its location in the rack, then,
slide the server off the pallet directly into the rack.
1
2
3
4
5
15