Sun Microsystems Fire X4800, Installation Manual

Page: 92 / 142

Figure Legend
1 Connect an Ethernet cable between the NET MGT port and the network to which future
connections to the SP will be made. NET MGT port 0 is the suggested default.
2 Connect a serial cable between the SER MGT port and a terminal device or a PC.
You might need an adapter. The server comes with a DB9–to-RJ45 serial port adapter.
The SER MGT port provides a direct serial connection to the SP. You can use this to discover
the SP’s IP address, and configure it if necessary. DHCP is the default, but you can configure it
to use a static IP address as well. Once you know the SP’s IP address, you can use a web
browser or an SSH connection to communicate with the SP over the NET MGT port.
Alternatively, you can continue to use the serial port to communicate with the SP command
line interface (CLI).
Refer to the Oracle Integrated Lights Out Manager (ILOM) 3.0 Documentation for details.
Connect the multiport cable to the KVM connector. This cable provides connectors for the
serial console, the video console, and USB.
3 Connect power cable to power source.
4 EM slots – see “Cabling NEMs and PCIe EMs” on page 95 .
5 NEM slots – see “Cabling NEMs and PCIe EMs” on page 95 .
1 2 3
4
5
Attaching Administration (SP) Cables
Sun Fire X4800 Server Installation Guide • —12, March 2011 92